Blackouts and power outages are no problem when you have this 12-Volt Battery Backup Sump Pump - designed to go to work for you even when the power doesn't! BSP15 has an alarm system to let you know the standby system has been activated. Blue Angel Pumps Model #BSP15, same as Wayne Model ESP15

The BCAP33-CI submersible pump is designed with the “NEW” “INTELLI-SENSE” switch. This revolutionary patented technological advancement in switching devises uses capacitance to detect and measure water and air and automatically turns the pump on and off. A.K.A: #58337-BLA1.

The submersible pump is designed with the new “Intelli-Sense” Switch, Microprocessor Controlled - No Moving Parts to Wear Out! Motor is oil filled and sealed for cooler running and designed to operate under water. When water is detected, the pump will automatically start.

Blue Angel is one tough sump pump! Model #BCS33: 1/3 HP, 58 Gallons Per Minute at 5 Ft Head. Cast iron volute for durability. Pump Switch: Vertical Mechanical Float Switch provides reliable operation and allows installation in sump basins 11" in diameter, Cut-in Level (Factory Set): 9", Cut-out: 4", 8 ft. power cord, 1-1/2" Discharge.

1/2 HP Cast Iron Sump Pump #BCS50, pumps 65 Gallons Per Minute at 5 Foot Head. The Blue Angel BCS50 has a Vertical Mechanical Float Switch, 1-1/2 Inch discharge, Cast iron volute with 1.5" NPT discharge, stainless steel fasteners and inlet covers, 8 ft. power cord, Glass-reinforced poly-carbonate impeller, Fits 11" sump basin.

Series ELV is an elevator sump pump system. You can get this pump by itself, or with OilTector control and an alarm. The pumps come in 1/3 or 1/2 hp, and 115 or 230 V. Models: ELV250, ELV280, ELV280HV, EV250, EV280, EV280HV.

The HT450 series pumps from Liberty are high temperature (180°F) submersible sump pumps. The HT450 is a manual pump and the HT453 is a mercury-free float with series plug.

With a shut-off head of 37 feet and 3/4" solids-handling capability, the 280-series covers a wide-range of low-head to mid-range sump pump applications. Designed for use with STEP and mound septic systems, liquid waste transfer and high output sump water applications, you can count on the 280-series to offer superior pumping performance. Designed with Liberty's unique one-piece cast iron body and quick-disconnect cords available in 10' and 25' lengths, 10' cord is standard

With a shut-off head of 37 feet and 3/4" solids-handling capability, the 280-series effluent pump by Liberty covers a wide-range of low-head to mid-range sewage pump applications. Uses a Wide-Angle Float Switch with Quick Disconnect. Designed with Liberty's unique one-piece cast iron body and quick-disconnect cords in 10'and 25' lengths. 1/2 HP 208-230 Volt.

With a shut-off head of 37 feet and 3/4" solids-handling capability, the 280-series by Liberty covers a wide-range of low-head to mid-range sewage pump applications. Uses a Wide-Angle Float Switch with Quick Disconnect. Designed with Liberty's unique one-piece cast iron body and quick-disconnect cords in 10'and 25' lengths. 1/2 HP 115V.

With a shut-off head of 37 feet and 3/4" solids-handling capability, the 280-series by Liberty covers a wide-range of low-head to mid-range sewage pump applications. Uses a Wide-Angle Float Switch with Quick Disconnect. Designed with Liberty's unique one-piece cast iron body and quick-disconnect cords in 10'and 25' lengths.

1/3 Horsepower, brass, Pedestal Sump Pumps, double screen, flexible shaft coupling for quiet performance, stainless steel fasteners, large base for added stability, 1-1/4 Inch discharge. 111SP by Liberty Pumps.