Series ELV is an elevator sump pump system. You can get this pump by itself, or with OilTector control and an alarm. The pumps come in 1/3 or 1/2 hp, and 115 or 230 V. Models: ELV250, ELV280, ELV280HV, EV250, EV280, EV280HV.

The HT450 series pumps from Liberty are high temperature (180°F) submersible sump pumps. The HT450 is a manual pump and the HT453 is a mercury-free float with series plug.

With a shut-off head of 37 feet and 3/4" solids-handling capability, the 280-series covers a wide-range of low-head to mid-range sump pump applications. Designed for use with STEP and mound septic systems, liquid waste transfer and high output sump water applications, you can count on the 280-series to offer superior pumping performance. Designed with Liberty's unique one-piece cast iron body and quick-disconnect cords available in 10' and 25' lengths, 10' cord is standard

With a shut-off head of 37 feet and 3/4" solids-handling capability, the 280-series effluent pump by Liberty covers a wide-range of low-head to mid-range sewage pump applications. Uses a Wide-Angle Float Switch with Quick Disconnect. Designed with Liberty's unique one-piece cast iron body and quick-disconnect cords in 10'and 25' lengths. 1/2 HP 208-230 Volt.

With a shut-off head of 37 feet and 3/4" solids-handling capability, the 280-series by Liberty covers a wide-range of low-head to mid-range sewage pump applications. Uses a Wide-Angle Float Switch with Quick Disconnect. Designed with Liberty's unique one-piece cast iron body and quick-disconnect cords in 10'and 25' lengths.

With a shut-off head of 37 feet and 3/4" solids-handling capability, the 280-series by Liberty covers a wide-range of low-head to mid-range sewage pump applications. Uses a Wide-Angle Float Switch with Quick Disconnect. Designed with Liberty's unique one-piece cast iron body and quick-disconnect cords in 10'and 25' lengths. 1/2 HP 115V.

With a shut-off head of 37 feet and 3/4" solids-handling capability, the 280-series by Liberty covers a wide-range of low-head to mid-range sewage pump applications. Uses a Wide-Angle Float Switch with Quick Disconnect. Designed with Liberty's unique one-piece cast iron body and quick-disconnect cords in 10'and 25' lengths.

1/3 Horsepower, brass, Pedestal Sump Pumps, double screen, flexible shaft coupling for quiet performance, stainless steel fasteners, large base for added stability, 1-1/4 Inch discharge. 111SP by Liberty Pumps.

One of the most advanced 1/4 hp sump pumps available, Liberty's 240-series features a unique one-piece cast iron housing with peripheral port suction. This design eliminates the motor seal ring and helps reduce potential jamming from debris. Other features on the 240-series include a quick-disconnect power cord and Liberty's patented VMF switch technology for smaller sump pits (model 247).

VMF - Vertical Magnetic Float. Liberty Series 450 Sump Pumps Feature - 1/2 hp - 115V - 3450 RPM motor, 1-1/2" Discharge, 3/8" Solids. Cool running and efficient, with deep-finned powder coated aluminum motor housing, polypropylene base and vortex style impeller. Designed with a major width of only 9.6 inches so this pump can fit in many smaller sump pump pits.

The Model S37 from Liberty was designed to handle the problem areas of sump pumps in new home construction. Powered by a durable 1/3 hp motor, the S37 offers larger clearances around the impeller for better solids and debris handling.

NEW from LIBERTY ! The SumpJet (Model SJ10) is a water powered back-up sump pump that will protect your basement in the case of a power outage.