Water Pressure Reducing Valves

1/2" Water Hammer arrestor with NPT Connection. Made of Copper. Maximum Pressure 153 PSI. Preset setting 60 PSI. Temperature range 33 degrees to 180 degrees Fahrenheit. Overall Height 5-1/2" with an overall width of 1-7/16".

Brady air volume controls are designed to insure the proper balance of air and water in a water pressure system. They prolong pump life by reducing the cycling frequency and can be used on jet, centrifugal and rotary pumps.

A water hammer arrestor stops the bang of water pipes by absorbing the shock of fast operating valves. Watts 150A-HA water hammer arrestor fits right on your washing machine or other hose bib and is easy to install!. Watts Model150A-HA has a swivel 3/4 female hose X 3/4 male hose brass tee. You may have seen Richard Trethewey install a Watts #150A-HA, on the Laundry Pipe segment of the TV Show "Ask This Old House" titled "Silencing noisy pipes with a water-hammer shock suppressor".

WATER PRESSURE REDUCING (PRV) VALVE, NPT threaded female union inlet x NPT female outlet. The Watts PRV's are available in sizes from 1/2" - 2". A water saving test program concluded that reducing the supply pressure from 80-50psi (551-346kPa) resulted in a water savings of 30%.

Watts U5BLP is a water pressure regulator for low pressure ranges, Water Pressure Reducing Valve (PRV)

Watts U5BLP 2 Inch is a water pressure regulator for low pressure ranges.Water Pressure Reducing Valve (PRV)

Watts Series # N55B-M1 are bronze body Water Pressure Reducing Valves that are easily and quickly serviceable without removing the valve from line. N55BU-M1 NPT threaded union inlet x NPT

This valve is designed for emergency safety relief only and shoudln't be used as an operating control. The valve is bronze with female threaded inlet and outlet points. The 3/4" FIP X 3/4 FIP Watts Water Pressure Safety Relief Valve is Watts Regulator part number 335M1.