Automatic Cast Iron Ejector Pump
Liberty's LE70-series is a 3/4 hp sewage pump with 2" solids-handling capability. It is a very popular automatic sewage, dewatering and effulent ejector pump. Constructed of heavy cast iron with a tough epoxy powder coat finish, stainless steel fasteners and rotor shaft, the LE70 is designed for durability.
| Model | List Price | Your Price | Quantity |
|
115V, 12a, 2" Flanged LE71A2    
|
$673.00 | $467.06 | |
|
115V, 12a, 3" Flanged LE72A3
|
$737.00 | $511.48 |
Automatic sewage, dewatering & effulent ejector pump
Liberty's LE70-series is a 3/4 hp sewage pump with 2" solids-handling capability.
Constructed of heavy cast iron with a tough epoxy powder coat finish, stainless steel fasteners and rotor shaft, the LE70 is designed for durability.
LE70 Series is designed with a quick-disconnect cord design allows for easy interchange of power cords in 10'and 25' lengths.
Available in 2" or 3" discharge configurations and a wide range of voltages.
208-230v Automatic Cast Iron Ejector Pump
Features
• 3/4 hp - 208 - 230v, 6 amp. 1725 RPM Motor
• Automatic sewage / dewatering, and effulent,ejector pump
• 2" Solids-Handling 2" or 3" Flanged Discharge
• Heavy cast iron construction with a tough epoxy powder coat finish
• Impeller - 2 vane, cast iron, semi-open design, capable of passing a 2 inch sperical solid
• Oil filled, thermally protected motor
• All stainless steel fasteners
• Stainless steel rotor shaft
• 10' UL approved power cord standard with quick-disconnected design, allows replacement of cord in seconds without breaking seals to motor (20' optional cord is available - extra charge).
• Float Switch - Mercury-free adjustable mechanical switch sealed in a PVC float with series plug for manual bypass operation.
• Seal - The Shaft seal is constructed of carbon/ceramic unitized design, with BUNA N elastomers and stainless housings
Dimensions:
• Height: 14.1"
• Major Width: 12.5"
• Maximum fluid temperature 145 degrees F.
Performance Data
|
Total Dynamic Head in Feet *
|
Gallons Per Minute
|
|
10'
|
120
|
|
15'
|
88
|
|
20'
|
60
|
|
24'
|
30
|
|
28'
|
0
|
*Q: What is TDH (Total Dynamic Head)?
A: TDH or Total Dynamic Head is a combination of two components – Static Head and Friction Head – and is expressed in feet. Static head is the actual vertical distance measured from the minimum water level in the basin to the highest point in the discharge piping. Friction head is the additional head created in the discharge system due to resistance to flow within its components.
- Last Updated: 8/15/2008 10:18:28 AM
- Store ID: 150019
- Back to Top
There are currently no customer reviews for this product. Be the first to add one by filling out the form below!
Please only leave your comments in the box below. If you have an inquiry you would like to make or you need to contact us, please click here.
