End of the Pipe Gripper Plugs
Cherne's most popular mechanical plug due to an extra-large wing nut combined with a natural rubber "O" ring. "End of the Pipe" Gripper Plugs are ideal for plumbing system tests.
End of the Pipe GripperŪ Plugs by Cherne / Oatey
The Gripper® is Cherne's most popular mechanical plug due to an extra-large wing nut combined with a natural rubber "O" ring. Two styles of Grippers are offered: the End of Pipe (seals only at the end of a pipe) and Inside of Pipe (seals as far into the pipe as needed).
Gripper Plugs are ideal for plumbing system tests. They all have a twist to seal wing nut operation. The Gripper Plugs are made from high impact ABS plastic plates connected by a non-rusting zinc plated steel carriage bolt and wing nut. Gripper plugs can be used as temporary or permanent pipe plugs.
| Size Usage Range | Maximum Allowable Back Pressure |
|||||||
| Part Number |
Nominal Size |
Minimum Diameter |
Maximum Diameter |
Air Pressure |
Head Pressure |
Plug Diameter |
Plug Length |
Product Weight |
| End of the Pipe Gripper® Plugs | ||||||||
| 270 245 | 4" (100mm) |
3.8" (96.01mm) |
4.06" (103.21mm) |
17 psi (1.2bar) |
40 ft (12M) |
3.76" (95.5mm) |
2.5" (63.5mm) |
8 oz (.23kg) |
| 270 261 | 6" (150mm) |
5.77" (146.56mm) |
6.08" (154.43mm) |
17 psi (1.2bar) |
40 ft (12M) |
5.75" (145.92mm) |
3.75" (95.25mm) |
2.5 lbs (1.14kg) |
| 270 270 | 8" (200mm) |
7.7" (196mm) | 8.03" (211mm) |
17 psi (1.2bar) |
40 ft (12M) |
7.75" (196.72mm) |
3.75" (95.25mm) |
3.0lbs (41.36kg) |
- Last Updated: 10/25/2007 5:58:20 PM
- Store ID: 148825
- Back to Top
Please only leave your comments in the box below. If you have an inquiry you would like to make or you need to contact us, please click here.







