The EZ Basement Sewage Waste Pump/Tank System

LowPro41LP - Low Profile Sewage System Overview:

2" Solids-Handling

Liberty's new LowPro41LP offers an easier solution for adding a basement bathroom. Unlike traditional sewage pump basins, the LowPro is designed to sit directly on the floor eliminating the costly task of breaking-up concrete. Its low profile tank can be framed around with standard 2" X 6" floor joists, totally concealing the unit for a complete finished appearance. This new unit from Liberty can also save hours of installation time because it arrives (fully assembled)* from the factory with a 2" solids-handling, sewage pump. Additional features include a powerful internal spray that helps break down solids and a split cover for easy access to the tank and switch, allowing access without disturbing the discharge or vent pipe.

LowPro41LP - Low Profile Sewage System you can "pick-up" the whole bathroom and it's really easy!

• The Liberty - Low Profile Sewage System accommodates a toilet, (**sink / vanity, De-humidifier, Bathtub or shower with an additional 2" Inlet.)
• Low Profile Sewage System Fits almost anywhere.
• Low Pro can be used with many (most) toilet styles.
• Perfect for basement, family rooms, warehouses, factories, room additions.
• LowPro41LP - Can be installed free standing on any level surface or the tank and all piping can be hidden behind a wall and under the floor.
• No need to destroy a perfectly good concrete floor, The Low Pro Sewage Lift System can be installed free standing on any level surface.
• LowPro41LP - Low Profile Sewage System is easily installed.

LowPro41LP - Sewage System Fully Assembled System Features:

• Durable one-piece poly tank with split cover design - allows access to switch area without disturbing discharge and vent piping.
• 4/10 HP cast iron sewage pump, 2" solids handling.
• Pre-mounted float switch.
• Schedule 80 Heavy Duty PVC discharge pipe (internal).
• 2" check valve.
• Brass Closet Flange with extra spacers for optional floor heights. (1/4" and 1/2" are provided)
• Pipe grommet seal for additional 2" inlet pipe from a **shower or **sink.
• Engineered water jet provides a powerful spray within the tank to help break down solids and reduce potential jamming.
• Flow-adjusted pump maximizes pump cycle time and increases pump life.

Specifications of the Liberty Pumps - LowPro41LP - Sewage System:

• 4/10 hp
• 115V
• 13 amps
• 60Hz
• 1550 RPM
• Maximum fluid temperature: 140°F.
• Assembled weight: 91 lbs.

LowPro41LP Sample Installations

The LowPro41LP can be installed freestanding or built-in, concealing the pump compartment and piping.

The platform section of the tank is sized to fit flush with an elevated floor framed with 2" x 6"
material.

Note: Access to pump compartment is required on built-in installations.

For addition of a lavatory or shower, a rubber pipe seal is included. Seal accepts 2" schedule 40

PVC piping. Showers must be elevated to allow gravity flow to unit.

**Showers or tubs must be elevated to allow gravity flow to unit.

Please Note: The above specification sheet will read for a LowPro41. Please be advised that the LowPro 51 and the LowPro41 are the same except for the pump size: LP41 = 4/10 HP pump & LP51 = 1/2 HP pump. The offering here is for the LowPro41LP, 4/10 HP Pump.

Liberty Pumps LowPro41LP Additional Documentation:

Product Specification Sheet
Installation Instructions (English)