For residential or commercial condensate removal applications. HARTELL's PAB3 Condensate Pump: now with new improved float design!

The HARTELL PAB3 Condensate Water Pump is designed to lift up to 22 feet. It is a heavy-duty residential condensate pump. The HARTELL PAB3 Condensate Pump is reliable and durable enough that it may be used for some demanding commercial condensate removal pump applications (see specs).

The HARTELL PAB3 Condensate Water Pump Features:
• ABS plastic reservoir
• Thermally protected, 3.3" motor with 300 series S.S. shaft
• Built-in full flow check valve for 3/8" ID plastic tubing
• 6' power cord with molded plug (NEMA 5-15P or 6-15P)

The HARTELL PAB3 Condensate Pump is the ideal pump for heavy-duty residential and commercial applications. With a full one gallon reservoir, aluminum reservoir cover and enclosed 3.3" motor frame, the PAB3 is a true workhorse! The HARTELL PAB3 Condensate Pump carries a three year limited warranty, longer than any other condensate pump on the market.

Specifications of The HARTELL PAB3 Condensate Water Pump
• Motor - 1/20 HP at 3,000 RPM
• Electrical - 115V 2.2A / 230V 1.0A
• Inlet Size - 3 Inlets 1 1/8" and 1 3/8", optional bottom 1" FNPT
• Discharge Size - 3/8" ID
• Reservoir Capacity - 1 Gallon
• Unit Dimensions - *9.25"W x 6.0"D x 9.75"H
• Inlet Height - 4.5"
• Maximum Temperature - 110"deg; F
• Sealed Reservoir - No
• Weight - 6 lbs.
*Width at mounting table is 11.25"

HARTELL PAB3 - Pump Performance
• 5 Foot Lift - 87 GPH
• 10 Foot Lift - 70 GPH
• 18 Foot Lift - 37 GPH
• 20 Foot Lift - 22 GPH
• Maximum Lift - 22 Feet

Typical Condensate Pump Applications
Condensate is produced at a rate of up to a gallon per hour by a residential central air conditioning unit or gas condensing furnace. The installer will feed the condensate from the appliance drain into one of the pumps inlet ports. Hartell condensate pumps are equipped to connect with 3/8" ID plastic tubing. The tubing is connected to the pump check valve, leading to a drain line, sump, French drain or laundry sink.

The lift or "head" of the pump refers to the height the pump is required to "lift" the water up to the drain. The distance the water needs to travel horizontally once the lift is achieved is referred to as the "run". The "run" does not effect the lift or flow rate of the pump unless it exceeds 50 feet. "Runs" of 50' or more will decrease pump output by about 10%.

Hartell condensate pumps are perfect for use as wastewater drain pumps for icemakers, beverage dispensers, drinking fountains, water coolers and dehumidifiers.