Temperature Remote Controller for TAKAGI Instantanious Gas Water Heaters
TAKAGI TK-RE02 Temperature Remote Controller has multiple functions. It allows the output temperature from the T-K1S to be adjusted within the range of 99 °F to 182 °F. The TK-RE02 Controller also works as a display and diagnostic tool that will give a concise error code whenever there may be a problem with the unit. The Takagi TK-RE02 will also give you key operating information about your water heater. Press the INFORMATION Button on the TK-RE02 to check the water heater's Inlet Temperature, Outlet Temperature and Water Flow in GPM (Gallons Per Minute). Temperature Remote Controller for TAGAGI Instantanious Gas Water Heaters - TK-RE02, allows output temperatures beyond the factory settings shows error codes, and monitors incoming and outgoing water temperatures.

The TK-RE02 TAKAGI Remote Controller includes factory set temperature set-points of: 95, 100, 102, 104, 106, 108, 110, 111, 113, 115, 117, 122, 131, 140, 158, & 167F.As shown in the matrix below the TAKAGI TKRE02 Controller may be use with the following models of Takagi Gas Water Heaters: FLASH T-K2 FLASH T-KD20 FLASH T-KJr. & FLASH T-K1S, as of 10/05.Additionally the TAKAGI TK-RE02 Remote Controller is designed for use with BOSCH / AQUA STAR Tankless Gas Water Heaters - Model 240FX.In case of an interruption of power to the water heater systen the TK-RE02 turn on automatically, for your convience when power is restored, the unit will revert to the last temperature setting.

The TK-RE02 uses 18 AWG wire (no polarity). The maximun wire run is 150 feet. Wire is not included with the controller. Click here if you need thermostat wire.

"Tankless water heaters are [a promising technology] that has significant evergy savings potential compared to conventional products. If these products eventually achieve widespread market acceptance, tremendous gains in energy savings and associated pollution prevention could be achieved." ...U.S. Department of Energy, January 2004