Sloan C-100500

Flushmate Cartridge Kit
This repair kit from Sloan was designed to repair their Flushometer Tank System. The part is product number C-100500.

Installation Information
When replacing components on this tank system, be sure that the water supply valve is turn off and the toilet has been flushe to relieve pressure. Also, use of lubricants, corrosive chemicals, or household cleaners on Flushmate products will void your warranty.

Removal
Remove the flush valve cartridge assembly by inserting the handles of a pair of pliers between the spokes of the cartridge assembly. Turn the flush valve cartridge counter clockwise until you can lift it out of the Flushmate tank. On 501-B series or older flush handle fixtures, you will need to remove the flush rod first and disconnect the handle linkage. Loosen the front side retainer clip and slide the flush rod out from under it. Lift the flush rod and pull it toward you. Use caution to prevent the retainer clips or screws from falling into the china holding tank; they may be difficult to retrieve. On the 503 and 504 series flush handle fixtures, disengage the flush rod from the handle linkage and flip it away from the flush valve cartridge. It is not necessary to remove the retainer clips.

Installation
Insert the flush valve cartridge assembly into the Flushmaster tank and thread it clockwise into place until one black thread on the Flushmate tank is showing above the flush valve cartridge. Fully open the water supply valve and continue to thread the flush valve cartridge, 1/4 turn at a time, pausing briefly between each 1/4 turn until the water stops running into the toilet bowl and the Flushmate tank pressurizes. Reinstall the flush rod and handle linkage.

Actuator Adjustment
Check the actuator adjustment. The flush rod or push button should not interfere with the actuator. The proper clearance should be approximately 1/8" when the push button or flush handle is stationary. On push button type fixtures, loosen the set screw on the actuator and rotate the actuator up (counter clockwise) until the proper clearance is obtained. For flush handle fixtures, gently lift the flush rod and observe the clearance. If necessary, adjust the actuator to allow for proper clearance.

Sloan Warranty Information

10-Year Limited Warranty
Sloan Flushmate (the "Company") warrants the Flushmate operating system (the "unit") to be free of defects in material and workmanship for a period of ten years on the replacement components and a lifetime limited warranty on the Flushmate tank from the date of installation and the Company promises to replace any part of this product that proves, upon our inspection and within ten years from date of installation, to be defective in material or workmanship. All labor and transportation costs or changes incidental to warranty service are to be borne by the purchaser-user. This warranty is subject to the following:

Conditions to Warranty
1. A warranty registration card has been fully completed and mailed by the purchaser (the "user") to the Company within thirty days of the date of installation. Product may also be registered online or by telephone.
2. The unit has been subject to proper installation, operation and maintenance as outlined in the installation instructions that were supplied with the unit. Note carefully that this warranty is voided if the unit is installed and operated subject to water supply line pressures greater than 125 psi or less than 25 psi.
3. Service and repairs may only be performed by authorized representatives of the Company or by others upon specific approval by the Company. Unauthorized repairs or alterations shall specifically void the warranty.
4. Use of petroleum-based lubricants or corrosive cleaning products containing chlorine, such as household bleach, drop-in blocks or tablets, or disinfectants that are applied inside the china holding tank will void your Flushmate warranty.
5. Proof of purchase is required.

Exclusions
In no event shall the company be liable for incidental or consequential damages, for damages resulting from improper installation, or for damages cause by neglect, abuse or alteration. All implied warranties, including any implied warranty of merchantability or fitness for any particular purpose are limited to a period of ten years from the date of installation.

Some states do not allow limitations on the duration of an implied warranty and some states do not allow exclusions or limitations regarding incidental or consequential damages so the above limitations may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary from state to state. No person is authorized to change, add to, or create any warranty or obligation other than that set forth herein.