Jet Swet Solder Kit an Essential Tool Kit for Professional Plumbers

Jet Swet Solder Kit 1/2 to 2" with Carrying Case #6100
Swet/Solder on a copper tube line without draining the entire water system! You will be able to make fast water line repairs on any common sized copper tube line when you have the full array of Jet Swet tools that are in this kit.

The 6100 Jet-Swet kit contains six Jet Swet Tools:
• 1/2"
• 3/4"
• 1"
• 1-1/4"
• 1-1/2"
• 2"

Plumbers know well that a major challenge in the plumbing trade is that every repair made to a copper tube, piping system needs to be made in a completely water-free (dry) way. If there is just a trickle of water in the tubing that you are trying to solder, then your in trouble. The solder joint will not get hot enough where there is water to allow the solder to melt and the capillary action of the molten sloder will not be able to take place.

Plumbing Repair and Maintanance

Water makes it pretty tough for plumbers when it comes to removing and replacing valves. Before Jet Swet™ was invented, a valve repair would might consist of the plumber shutting off the water at the street, opening the faulty valve or another valve in the system and waiting, waiting for one or two hours, and in some cases with large or complicated buildings maybe even days for the water to completely drain from the system! Jet Stwet allows the plumber to complete the repair in a water free environment quickly and professionally.

With the Jet Swet™, the common plumbing problem of unwanted water in a copper tube piping system is solved quickly, effectively and professionally so that maintanance and repair soldering operions can be performed.

Jet Swet™ Features
• Jet Swet™ Allows you to do pipe repairs immediatly, as soon as you get to the job. No waiting for water to completely drain.
• Jet Swet™Allows you to gain immediate control over draining or siphoning water in a piping system.
• Jet Swet™Keep costs down so you can secure more "contract" work.
• Jet Swet™ allows you to not lose time & money on your "contract" work due to uncontrollable draining water.
• Jet Swet™ allows you to be able to service hotels, motels, and apartments more easily.
• Jet Swet™ can easily pays for itself in one or two jobs!

Jet Swet Puts YOU in Control!

The Jet Swet™ is used by the plumber upon arrival to instantly be in control of any water situation. The Jet Swet™ is used by first turning off the active water pressure at the street, opening the faulty valve (if it won’t open, most plumbers just cut the valve off), inserting the Jet Swet™ through the draining water stream, through the valve or virgin pipe, compressing the Jet Swet™ gasket and instantly shutting off the water (up to 65 lbs). Now the plumber can immediately repair the pipe or valve, right over the Jet Swet™ tool!

Once the Jet Swet™ is stopping the water, you can solder on a new full-port or gate valve, right over the Jet Swet™. If your repair requires you to solder on a restrictive valve from which the Jet Swet™ cannot be removed, instead of soldering on a regulatory valve, you solder a male nipple onto the pipe overthe Jet Swet™, remove the Jet Swet™ from the pipe and then just thread on any “threaded” regulatory valve you want. Close the valve and you are done!

The plumber looks professional, and the client is not annoyed for paying $XXX an hour for a contractor to wait for water to drain. 

Jet Swet™ tools are made of the highest quality materials possible: High tensel strength steel, Aircraft aluminum, and gaskets of pure silicone!

The Jet Swet™ is essential for building maintenance crews, because the management cannot afford to have the water shut off for very long. In many cases, every minute the water is shut off, the management is losing money or dealing with other challanges to the building occupants or the public  (suituations like those that may be in found in hospitals, hotels, casinos, convention centers, etc.). The Jet Swet™ helps repair costly problems in minutes, not hours.

In most companies, a repair & maintenance crew must go through their management to get approval for funding new tools. When you explaine to management that The Jet Swet Tool often allows pipe systyem repairs to be made by only shutting off the water supply for minutes instead of hours, funding is almost always guaranteed.