Kinetic Water Ram Professional Drain Cleaner
The Kinetic Water Ram uses a burst of compressed air that drives a shock wave (kinetic energy) through water to break up stoppage. It's particularly useful when the stoppage is on the far side of a drum trap or series of tight bends, since the shock wave can travel around bends without losing its force.
Kinetic Water Ram Professional Drain Cleaner
Here's a compact, lightweight tool for quickly opening clogged sinks, toilets and tubs. It handles rust, grease, sediment, and scale in lines up through 4" in diameter.
The Kinetic Water Ram uses a burst of compressed air that drives a shock wave (kinetic energy) through water to break up stoppage. It's particularly useful when the stoppage is on the far side of a drum trap or past a series of tight bends, since the shock wave can travel around bends without losing its force.
The Ram has a self-contained pump and pressure gauge, so you can hit the stoppage with just the right amount of force. You get instant impact with no build-up of pressure in the plumbing system is key to how the Kinetic Water Ram in DWV (Drain,Waste and Vent) piping systems. The force is transmitted through water, so it's not affected by open stacks or vents.
The shock wave travels through the water, bypassing vents and stacks, and going around tight bends to knock out the stoppage.
The instant impact protects pipes and joints because there is no build-up of pressure in the plumbing system.
The optional toilet attachment (#KR-CA), screws onto the front of the Ram and enables you to position the cone in the bowl to get a tighter seal. As a result, you can strike the blockage with greater impact and no splash back.
Kinetic Water Ram Units:
KR-A Kinetic Water Ram, complete with caulking extension hose, 4" rubber cone, and five rubber plugs
KR-A-WC Same as above, plus carrying case.
KR-C-WC Same as KR-A-WC, plus KR-CA closet attachment.
KR-D-WC Same as KR-A-WC, less caulking hose, plus 6" rubber cone, four expansion plugs, check Valve, water supply hose, and universal faucet adapter.
Operational Diagram

Specifications
- 16 gauge plated cylinder tested for up to 600 lbs, pressure.
- 160 lbs. gearless pressure gauge provides pinpoint pressure control.
- Built-in air compressor easily pumps up to desired pressure.
- Flexible cone seals drains ranging from 1-1/4" to 4"diameter
- Equipped with Schraeder valve for use with external air compressor when clearing difficult stoppages.
- Last Updated: 9/17/2007 9:46:42 AM
- Store ID: 150008
- Back to Top
Please only leave your comments in the box below. If you have an inquiry you would like to make or you need to contact us, please click here.







