Central Brass 0336 Water-saving shower valve or urinal flush valve

Central Brass #0336-1/2" and #0336-3/8" Slow Closing Straight Stops have a cast brass body with a polished chrome plated finish.
 The #0336 model Push-Button Slow-Close Straight Stop is available in two sizes for your selection, either 3/8" or 1/2" NPS female threads. This water saving valve has a vandal-resistant handle and an external cycle adjustment

Adjustable Slow Close Valve Cycle Time.   The brass push button handle is used to make the external adjustment to the cycle time. The button is then locked at the time setting with a set screw. The factory "on time", of the slow close push button valve is set at the factory to approximately 3-1/2 seconds. Longer cycle time is possible with internal adjustments.

All of the internal parts of the Central Brass #0336 Slow Closing Straight Stop are brass or stainless steel. The seals and O-Rings are EPDM rubber. The bonnet gasket is nylon.

Common Usage of the Central Brass 0336-1/2 and the 0336-3/8, Slow Closing Straight Stop:

• Showers - commomly used on outdoor showers.
• Foot Wash at the beach or pool
• Faucets
• Urinals

Specifications of the Slow Closing Straight Stop, Central Brass #0366 are:

• Cast Brass Body
• Brass and Stainless Steel internal parts
• All Internal parts are replaceable
• Polished Chrome Finish

Dimensions of the Central Brass 0336-1/2, (1/2") Slow Closing Straight Stop are:

• Depth ----- 1.25 In.
• Width ----- 2.5 In.
• Height ----- 4 In.
• Weight ----- 1 lb each 

Central Brass Model 0336 Slow-Closing Straight Stop Metering Valve Additional Documentation may be found thru these links:

Replacement Parts
Specification Sheet
Instruction Manual

 Please have a look at our links below for a huge selection of shower heads and accessories.