Stop Floods and Leaks - The BurstBuster is a point of use, leak detection and valve shut off system, 2009WH is 1-1/4" and is specifically designed for Water Heaters. An AUTOMATIC VALVE, it shuts off the water in the event that your water heater leaks and also has 2 electrical signal outputs you can connect various alarm systems too. 1-1/4 Inch is a good full flow size to use for a whloe house shut-off, (you likely may need additional adapters). Leaving home? Shut off your water so there can not be any chance of accidential flooding due to burst pipes or any other plumbing failures.

IntelliFlow KA2-BD Retro-fit installation kits for our popular Watts IntelliFlow™ (A2C-M1). For use with straight or angle shutoff valves.

VR8200 continuous pilot dual automatic valve combination gas control – Natural Gas or convertable to LP. For use with appliances with capacities from 20 to 200 cfh.

The leak sensor comes standard with both Watts IntelliFlow™ (A2C-M1) and Watts IntelliFlow™ (A2-WB-M1) automatic washing machine safety shutoff devices. We also offere it here as a replacement part.

The FloodSafe’s patented design protects against catastrophic water damage caused by burst, broken or ruptured water supply hoses and fittings. FloodSafe™ connectors include a standard braided stainless steel flexible hose and a FloodSafe™ shutoff device located on the inlet. -- Supplied with standard brass female hose bibb fittings at each end of the flexible connector. (H = Female Hose end. H = Female Hose end.)

The FloodSafe’s patented design protects against catastrophic water damage caused by burst, broken or ruptured water supply hoses and fittings. FloodSafe™ connectors include a standard braided stainless steel flexible hose and a FloodSafe™ shutoff device located on the inlet. -- All models are supplied with solid brass compression end fittings.

The FloodSafe’s patented design protects against catastrophic water damage caused by burst, broken or ruptured water supply hoses and fittings. FloodSafe™ connectors include a standard braided stainless steel flexible hose and a FloodSafe™ shutoff device located on the inlet. -- One end of the flexible connector is supplied with a plated, solid brass compression end fitting for connection to a supply stop valve. The other end is supplied with a plated, solid brass female iron pipe thread fitting. (C = Compression end. F = Female Iron Pipe (FIP) end)

The FloodSafe’s patented design protects against catastrophic water damage caused by burst, broken or ruptured water supply hoses and fittings. FloodSafe™ connectors include a standard braided stainless steel flexible hose and a FloodSafe™ shutoff device located on the inlet. -- One end of the flexible connector is supplied with a plated, solid brass female iron pipe thread fitting. The other end with a plated, solid brass fine thread female iron pipe fitting. (T = Fine Thread FIP End Fitting. F = Female Iron Pipe (FIP) end.)

The FloodSafe’s patented design protects against catastrophic water damage caused by burst, broken or ruptured water supply hoses and fittings. FloodSafe™ connectors include a standard braided stainless steel flexible hose and a FloodSafe™ shutoff device located on the inlet. -- One end of the flexible connector is supplied with ballcock end fitting. The other end is supplied with a plated, solid brass compression end fitting for connection to a supply stop valve. (C = Compression End. B = Ballcock End.)

The FloodSafe’s patented design protects against catastrophic water damage caused by burst, broken or ruptured water supply hoses and fittings. FloodSafe™ connectors include a standard braided stainless steel flexible hose and a FloodSafe™ shutoff device located on the inlet. -- Supplied with a plated, solid brass nut compression end fittings at both ends of the flexible connector and a brass male iron pipe thread elbow fitting. (C = Compression end. E = Male iron pipe elbow end.)