Hammer Arrestor

1/2" Water Hammer arrestor with NPT Connection. Made of Copper. Maximum Pressure 153 PSI. Preset setting 60 PSI. Temperature range 33 degrees to 180 degrees Fahrenheit. Overall Height 5-1/2" with an overall width of 1-7/16".

A water hammer arrestor stops the bang of water pipes by absorbing the shock of fast operating valves. Watts 150A-HA water hammer arrestor fits right on your washing machine or other hose bib and is easy to install!. Watts Model150A-HA has a swivel 3/4 female hose X 3/4 male hose brass tee. You may have seen Richard Trethewey install a Watts #150A-HA, on the Laundry Pipe segment of the TV Show "Ask This Old House" titled "Silencing noisy pipes with a water-hammer shock suppressor".

Mini-Rester 1/2 Inch Water Hammer Shock Arrestor by Sioux Chief. Water Hammer Arresting devices provide permanent protection against shock from water hammer. They are designed so the water in the system will not contact the air cushion in the arrester.

Control Water Hammer and pipes banging with Mini-Rester 660-H, Water Hammer Shock Arrestor by Sioux Chief. Mini-Rester 3/4 Inch Water Hammer Shock Arrestor by Sioux Chief provides permanent protection against shock from water hammer. Mini-Resters are designed so the water in the system will not contact the air cushion in the arrester. Prevent residencial water hammer. ¾" female swivel hose thread × ¾" male hose thread tee

Watts Regulator - Series 150A Water Hammer Arrestors are used in residential applications to control water pressure shock and prevent water hammer conditions. It consists of a pre-charged air chamber that is rechargeable, The 150A can be installed in new or existing plumbing systems at any angle and is ideal for dishwashers, clothes washers, and quick-closing faucets.