Autoflo Humidifier

072000 - Smart Digital Humidistat The 072000 is a digital humidifier control that can automatically adjust the indoor humidity set point as the outside air temperature changes. This intelligent control will maintain accurate humidity levels and a more comfortable indoor environment.

This is the Replacement Humidifier Media Pad for the Auto Flo 200P. Designed to inhibit mineral and slime build-up. This is an OEM part.

This is the Evaporator Media Pad for Autoflo Humidifer. Replacement for AUTOFLO Model 250, 40 and 4000 humidifiers.

This is the replacement OEM humidifier media pad, it is cylindrical shape. This evaporator Pad fits on a drum / wheel. The #97EPis an OEM replacement pad for the Autoflo Model 97. Autoflo Humidifier pads stay fresher longer with the Ultra Fresh treatment.

#SC-EP is an Autoflo Humidifier Water Evaporator Pad for Model SC-15

25019 Complete Solenoid Assembly. (Repair Part for AutoFlo Humidifer Model #250)

This high capacity, flow thru style humidifier is more reliable and easier to install and maintain than any other comparable brand. The model 250 can be used with any forced air furnace and mounted on either the warm air supply or the cold air return. This model humidifies your air with the bypass method, which forces air from the supply and pulls it into the return due to the pressure created in your furnace. The humidified air then mixes with the return air from your house and is forced back into your living area.

Humidifier Steam 10 A 240 Voltage @ 60 Hz Continuous Drain The S2020 automatically provides humidity whether the furnace is operating or not. Install in warm or cold air duct. Manufacturer - AutoFlo, Part Number: S2020

Humidifier - Steam Type - 120 Volt @ 60 Hz, Automatic / Continuous Drain. The S2000 automatically provides humidity whether the furnace is operating or not. AutoFlo S2000 Steam Type Humidifier may be installed in the warm or cold air duct. Manufacturer - AutoFlo, Part Number:#S2000. Air Humidifier, Evaporative Humidifier, Humidifier, Impeller Humidifier, Mist Humidifier.

The Autoflo 800111 Pad Holder (Media Wheel) is a wheel molded with front and back axles to hold the foam pad of the Model 97 Humidifer, and fits into the end of the motor shaft. This is a replacement part for the Autoflo Model 97 Humidifier unit.

The Autoflo 27200 Pad Holder (Media Wheel) is a wheel molded with front and back axles to hold the foam pad of the Model 97 Humidifer, and fits into the end of the motor shaft. This is a replacement part for the Autoflo Model 200P Humidifier unit.

This float assembly is a replacement part for Autoflo humidifier models 40, 200P, 200PR, 244D, 400BP, 400BPR, 800BP, and 800BPR. This assembly also works with Peerless Models 31001 and 31002. The float assembly is part number 401972.

Replacement Motor Mounting Plate Assembly for Model 97 Autoflo Humidifier. 24 volts. Contains one motor and mounting plate and 6 mounting screws. Product number 900015.