Mill-Rose
Mill-Rose found its beginnings in 1919, and is still a family owned company, now in its fourth generation. Mill-Rose is the U.S.'s largest manufacturer of twisted-in wire brushes used in virtually every industry. However, Mill-Rose manufactures all types of brushes. They manufacture over 100,000 sizes and shapes of brushes.
[1]Last >>
Copper Cleaning Brushing Tool
Clean both the copper tube and fittings without changing tools! With the Power Deuce - Brushing Tool (1/4" Hex Shank). Plumbers use the Mil-Rose Copper Cleaning Brush Tool to debur, clean and prepare copper tubing and copper fittings for better soldering adhesion. Available in 1/2" & 3/4".
| Model | List Price | Your Price | Quantity |
|
1/2 Inch Power Deuce Tube & Fitting Brush 62821    
Quantity Breaks Available:
|
$19.40 | $12.89 | |
|
3/4 Inch Power Deuce Tube & Fitting Brush 62831
Quantity Breaks Available:
|
$19.95 | $13.99 |
Professional Abrasive Mesh Cloth for Plumbers
Open Mesh Aluminum Oxide Abasive Sand Cloth Plumbers Roll - 10 yards by 1-1/2 in. wide. Nylon backing produces a very long-lasting, sharp cutting, very flexible and water proof. Plumbers mesh roll, providing long life and aggressive cleaning. Plumbers use Open Mesh Cloth for effective "sanding" preparation, to clean and debur copper tubing and fitings before soldering.
| Model | List Price | Your Price | Quantity |
|
Open Mesh Aluminum Oxide 70100
|
$15.30 | $11.49 |
Copper Fitting and Copper Tubing Cleaner
Six-in-One Copper Cleaning Brush Tool #70266 by Mill-Rose - This one tool will clean the inside diameter of 1/2" and 3/4" fittings, and outside diameter of 1/2" and 3/4" tubing. It will also ream and deburr the I.D. of tubing to meet most plumbing and building codes. PRO Plumbers - This is a handy tool for you. One tool does it all! Prep and clean copper tubing and fittings for soldering easily with a Mill-Rose Six-in-One Tool!
| Model | List Price | Your Price | Quantity |
|
Six-in-One Brush 70266
Quantity Breaks Available:
|
$16.58 | $12.95 |
Replacement kit for 4-in-1 and 6-in-1 Mill-Rose Clean Fit Brushes
Replacement kit for 4-in-1 and 6-in-1 Mill-Rose clean fit brushes.
| Model | List Price | Your Price | Quantity |
|
Replacement kit for 4-in1 and 6-in1 Mill-Rose Clean Fit Brushes 70269
|
N/A | $8.89 |
The Insurance Pad - Torch Flame Shield
Heat Shield - Flame and heat resistance to 2,500 degrees F. Reduce Liability when soldering or Brazing or other torch work. Work Safer - Work Faster - Work Smart with The Insurance Pad! A great tool or gift for the flame in your life - They will really like and use this! Guard your work and property from flame damage, high temperature, burning and fire.
| Model | List Price | Your Price | Quantity |
|
Heat Shield 71038
|
$50.00 | $34.95 |
Lock N Load Drybox
Features a water-resistant seal that locks out moisture as well as dirt and grime. Three compartments store and organize tools and parts. Lock N Load tool box is made of durable plastic.
| Model | List Price | Your Price | Quantity |
|
Heavy Duty 75605
Quantity Breaks Available:
|
$18.95 | $12.95 |
Red Seal -Tite/PTFE Tape 1/ Inch x 260 Inches
1/2" x 260" - High quality thread sealing tape dope for water - full-density Teflon®
| Model | List Price | Your Price | Quantity |
|
Thread Sealant P260
|
$2.75 | $1.49 |
Professional Abrasive Cloth
Open Mesh Aluminum Oxide 180 Grit Abrasive Cloth 1-1/2 Inch Wide X 10 Yards. Provides fast cutting action on copper, brass and other non-ferrous or plastic materials. Mill-Rose Abrasive Mesh Cloth can be cleaned out and reused by rinsing out in water.
| Model | List Price | Your Price | Quantity |
|
1-1/2 In. X 10 Yards 70100
|
$15.30 | $13.00 |
Clothes Dryer Vent Cleaning Kit
Clean your dryer vent with this combo cleaning pack!
| Model | List Price | Your Price | Quantity |
|
Combo Pack 84374
|
$28.95 | $28.95 |
Blue Monster Teflon Tape 1/2 inch X 1429 Inches
Blue Monster Teflon Tape Dope is not too thick and not too thin. It was developed in response to the demand for a higher-quality PTFE thread sealing tape that is easier
to apply. Blue Monster is rugged, not flimsy like most thread seal tapes on the market. Blue Monster is thicker and creates a more effective seal with less tape, and no need for pipe dope paste.
| Model | List Price | Your Price | Quantity |
|
PTFE Pipe Joint Sealant 70885
Quantity Breaks Available:
|
$3.08 | $2.30 |
Specialty Boiler Brush- Weil McClain
Clean Fit Products, Boiler Brush. Brush Size: 1-1/2" X 1-1/8". Works especially well for Weil-McClain Boilers. Milrose #84200.
| Model | List Price | Your Price | Quantity |
|
Boiler Brush 84200
Quantity Breaks Available:
|
$6.65 | $5.89 |
4" x 8' Brush Kit for Cleaning Clothes Dryer Vent Hose
This 4" Target Brush from Mill-Rose is designed to clean your clothes dryer vent hose line, it has an 8 foot flexible extension rod. Get rid of dust and lint that builds up in the hose restricting air flow and creating a fire hazard. Clean dryer vents regularly with the Target Brush Kit by Mill-Rose, product number 84374.
| Model | List Price | Your Price | Quantity |
|
Target Dryer Vent Brush 84374
|
$28.95 | $23.49 |
Replacement Kit for 4-in-1 and 6-in-1 Brushes
This replacement kit is for Mill-Rose 4-in-1 and 6-in-1 brushes. The kit is for 1/2" x 3/4" I.D., and is part of the Mill-Rose clean fit products line. Part number 70269.
| Model | List Price | Your Price | Quantity |
|
Replacement Brushes 70269
|
$9.88 | $6.92 |
Razorback™ Plumbers Tool
Razorback™ Wrench 73055 Eliminates the need for all other “Box End” wrenches. Fits most common styles of brass & plastic shower / sink drains “T” handle rotates 180˚ for easy access and maximum leverage. Made of extremely durable, high impact polycarbonate polyester.
Ideal for working in tight areas
Ideal for retrofits and new installations
| Model | List Price | Your Price | Quantity |
|
“Box End” Wrench 73055
Quantity Breaks Available:
|
$19.95 | $16.95 |
WATER-GATE Water Shut-Off Tool
Water Gate from Mill-Rose allows you to solder without draining the entire system!! Change out a valve, solder or glue on fittings, make line repairs and test lines while under pressure with the Water gate. There's no need to shut off water to the rest of the building, drain lines, use bread clogs or freeze lines. Ideal for refrigeration and boiler applications. Available in sizes 1/2", 3/4" and 1". Product numbers 77000, 77050, 77010.
| Model | List Price | Your Price | Quantity |
|
1/2" Water Gate Tool 77000
|
$40.16 | $36.14 | |
|
3/4" Water Gate Tool 77005
|
$43.19 | $38.87 | |
|
1" Water Gate Tool 77010
|
$44.81 | $40.33 |
[1]Last >>
