APR 1" Copper Branch Manifold (type L copper) features 1/2" APR outlets. By cutting the spun end of the manifold off, sections can sweat together to extend the number of outlets. Do not exceed acceptable flow rates for 1-inch nominal copper. Each manifold end requires a 1-inch transition fitting to complete the manifold assembly. NOTE: this product has been discontinued and is only available as supplies last!

APR 1" Copper Flow-through Manifold (type L copper) features 1/2" APR outlets brazed to the manifold body. Two 3/4" APR adapter fittings are brazed to the manifold ends for quick connection to 3/4" AQUAPEX tubing. NOTE: this product has been discontinued and is available only as supplies last.

APR Fitting Assembly with APR insert connects 1/2" and 3/4" Uponor Wirsbo PEX tubing to the brass manifolds. Sold as a two-piece assembly, it includes a ProPEX insert and R20 swivel nut.

APR Adapter for brass manifold transitions from the R32 manifold union nut to 5/8" Uponor Wirsbo PEX tubing.

APR Brass Coupling makes PEX-to-PEX connections for Uponor Wirsbo AQUAPEX tubing.

Improve the ease and quality of your plumbing installations with the AQUACENTER Valved Manifold by Uponor Wirsbo. Made from advanced engineered plastic (EP) materials, the AQUACENTER is the only valved manifold on the market that can offer what's really important to a plumber - total flexibility and serviceability.

Improve the ease and quality of your plumbing installations with the AQUACENTER Valved Manifold by Uponor Wirsbo. Made from advanced engineered plastic (EP) materials, the AQUACENTER is the only valved manifold on the market that can offer what's really important to a plumber - total flexibility and serviceability.

Red and Blue Replacement Valve Clips retain valve cylinders in AQUACENTER Valved Manifold body. Red indicates hot-water line. Blue indicates cold-water line.

Replacement Valve-turning tool eases turning of AQUACENTER manifold valve cylinders. One Valve-turning Tool is included in each AQUACENTER Valve Manifold Kit.

The Assembly/Mounting Bracket assembles AQUACENTER Valved manifold sections and mounts the manifold to the wall or stud. One bracket is required per manifold joint.

Replacement Valve Cylinder comes with assembled o-rings

ProPEX 3/4" Inlet (EP) connects 3/4" AQUAPEX to the AQUACENTER Valved Manifold. ProPEX 1" Inlet (EP) Connects 1" AQUAPEX to the AQUACENTER Valved Manifold.

The End Cap seals the unused inlet on an AQUACENTER Valved Manifold.

The 1 1/2" Stop Coupling isolates AQUACENTER Valved Manifold sections.

The 1 1/2-inch Flow-through Coupling joins AQUACENTER Valved Manifold sections.

Uponor Wirsbo's AQUACENTER Valveless Manifold is available with 3/4" or 1" inlets and 4, 6, 8, 10, or 12, 1/2" ProPEX outlets. The AQUACENTER is made EP, the same durable material used in Uponor Wirsbo's EP fittings.