Replacement Fuse (2 amps) (4 per Package) for Zone Control Modules. A3030009 - Replacement Fuse (2 amps), 4/pkg. A3030010 - Replacement Fuse (4 amps), 4/pkg.

The MultiCor T-handle Chamfering Tool bevels the ends of 1/2", 5/8", 3/4" and 1" MultiCor tubing in preparation for making a fitting connection. The T-handle is removable to use the tool with a drill for multiple chamfering.

The MultiCor Bending Tool allows for more precise, tighter bending radius than manual bends.

The MultiCor Bending Spring allows for tighter bending radius than manual bends

Straight-through support (zinc-plated) provides rigid straight through support for 1/2" AQUAPEX tubing as it exits a floor.

Chrome Finishing Sleeve slides over 3/8" and 1/2" Uponor Wirsbo AQUAPEX tubing connected to point-of-use valve to provide protection and improve appearance.

Steel Plate Protector protects tubing from possible damage by drywall, trim screws or nails, etc.

Use Stand-up Brackets in commercial multi-floor construction only. Secure the brackets to the deck form. Then install the 1/2" PEX tubing in the brackets, either with the 1/2" PEX tubing alone or with the 1/2" PEX tubing sleeved inside a corrugated polyethylene carrier tube.

The Multi-drain Washing Machine Outlet Box Cover Plate is a replacement part for the Multi-drain Washing Machine Outlet Box.

The Ice maker Box with Support Brackets Cover Plate is a replacement part for the Ice Maker Box.

The Ice Maker/Water Supply Box Cover Plate is a finishing part for the APR Ice Maker Box with Nails and APR Water Supply Box. This cover plate can accommodate up to 1/2-inch drywall.

The Ice Maker/Water Supply Box cover Plate is a finishing part for the APR Ice Maker Box with Nails and APR Water Supply Box. This cover plate can accommodate up to 1-inch drywall.

The APR Brass Sleeve slides over the end of the expanded AQUAPEX tubing and APR fitting to form the completed fitting. The APR Ratchet tool is used to slide the sleeve over the tubing and fitting.

APR Washing Machine Outlet Box comes with two 1/2" APR hot and cold color-coded valves. The versatility of the box allows the installer the freedom to mount the box with the valves either on the top or bottom.

APR Ice Maker Box with Nails comes with one 1/2" APR valve. The valve has a 14" OD compression connection for connecting to standard ice maker tubing. The pre-positioned nails are mounted on the box for quick installation. The cover plate for this ice maker box is sold separately.

APR Water Supply Box comes with one 1/2" APR valve. The valve has a 3/8" OD riser compression connection. The pre-positioned nails are mounted on the box for quick installation. The cover plate for this water supply box is sold separately.

This tool kit contains the APR Ratchet Tool, 1/2" and 3/4" jaw sets and a durable carrying case. The APR Ratchet Tool pulls the APR Brass Sleeve over Uponor Wirsbo AQUAPEX tubing and APR fitting to complete the connection. This is a required component of the APR fitting system for 1/2" through 3/4" AQUAPEX tubing.

APR Ratchet Tool Jaw Set is used with the Heavy-duty and regular APR Ratchet Tools. Each set consists of two jaws for the size selected.

This tool kit contains the Heavy-duty APR Ratchet TOol, 1/2", 3/4", and 1" jaw sets and a durable carrying case. The heavy-duty APR Ratchet Tool pulls the APR Brass Sleeve over Uponor Wirsbo AQUAPEX tubing and the APR fitting to complete the connection. This is a required component of the APR fitting system for 1/2" through 1/4" AQUAPEX tubing.

All Blunt Expander Heads listed below are compatible with the APR Blunt Expander Tool.