Laing ACT-AV (4234) is the Adjustable Automatic Valve for the Laing Thermotech ACT-202-BTW AUTOCIRC2, Under Sink Hot Water System. Please note this is the valve only, sold separately. We offer the Valve only for AUTOCIRC2, because additional valves may be desired for a project that may fixtures on separate branches of a plumbing system that require instantly available hot water. (Laing Part Number: 4234)

This wall mounting kit for point-of-use electric water heater installations provides an easy way to mount the water heater unit off the floor, out of the way for more usable floor space in a small area.

No Burst Water Heater Connector - Braided Stainless Steel - 3/4"FIP x 3/4"FIP

Heat Trap Fittings for residential water heaters can cut convective heat loss in the piping substantially, by as much as 60%. Easy to install. Heat Trap Fittings for Water Heaters have 3/4 inch Pipe Threads.

Remote Control for RTG-74 Rheem PRONTO Instant Gas Water Heaters. UMC-117 (Optional Main Remote Control Unit - Maximum temperature of 140F. UMC-117 is designed for use with models; 74PV, 199PV, 74DV, 199DV, 74X and 199X Tankless Water Heaters.

Magnesium & Aluminum Anode Rod for Water Heaters by Rheem / Rudd / Richmond. R-Tech is a replacement for an all aluminum anode rod it may be used in most popular sized, brands of water heaters including Bradford - White, GE, Hotpoint, A.O Smith, State, John Wood, Richmond, Rudd and others. The R-Tech Anode Rod can provide Cathodic Protection for any water heater that has a 3/4" FIP Tank Bung available for an Anode Rod, and that is shaped such that it will fit the 44" long R-Tech Anode Rod.

This Water Heater Thermostatic Gas Valve- Natural Gas is the OEM replacement for many popular models of Rheem and Rudd Residential Water Heaters. Part #SP8555B is for use with Natural Gas.

Wall Mounting Brackets for TAKAGI Gas Water Heaters.

Takagi TK-RE02 Temperature Remote Controller - Allows output temperatures beyond the factory settings and also shows error codes for problems that might develop while it monitors incoming and outgoing water temperatures.

Wall vent terminator for installation of Takagi water heaters to be vented out a side wall.

Exhaust Backflow Prevention Kit for Takagi Instanious Gas Water Heaters - Prevents cold air from entering vent and causing heat exchnager to freeze.

Outside Installation - Vent cap Kit, provides for outside installation of Flash T-K2 water heater.

Wall Ventilation Terminator for Takagi T-KD20 Water Heater - for use when venting a T-KD20 on a side wall application.

TK-TV07 - Direct Vent Conversion Kit for Takagi Flash #T-H1 Gas Water Heater to sealed combustion.

TH-TV08 Vent Cap is used when the T-H1 Takigi Water Heater Appliance is to be installed outdoors.

Temperature Remote Controller for Takagi Instanious Gas Water Heater.

Outside Installation Venting Cap - Vent cap kit provides for outside installation of TAKAGI Mobius T-M1 water heater.

The Wirsbo - Uponor Select Uncoiler Simplifies Installation and Reduces Labor. While your on our site please look at our PEX and MultiCore, we can supply your radiant heating project large or small!

Rheem High Altitude Chip 74PV(LP)), for Rheem Tankless Indoor 7.4 GPM Propane Gas Water Heaters.

Rheem High Altitude Chip for Tankless Indoor 7.4 GPM Natural Gas Water Heaters. 74PV(NAT)

Rheem High Altitude Chip for Tankless Outdoor 7.4 GPM Propane Gas Water Heaters.

Rheem High Altitude Chip for Tankless Outdoor 7.4 GPM Natural Gas Gas Water Heaters.

Rheem High Altitude Chip for Rheem Model 4.2 Propane Tankless Gas Power Vent Water Heaters, 42PV.

Rheem High Altitude Chip 42PV - Natural Gas, for use with Tankless Gas Water Heaters.

FVIR(Flammable Vapor Ignition Resistant)Gasket Replacement Kit. For use with Rheem, Rudd, or Richmond Gas Water Heaters, units manufactured after July 2003.