Shallow well adapter #4K62, made of cast iron for use with Goulds Pumps J+, J5,J5H, J7, J10 and J15.

Nozzle for Goulds Series J+ and JS+ models J7,J10 J7S,J10S pumps. As shown in our image, The Nozzle is a component part of the Goulds Pump shallow well adapter package. Select Goulds Pumps Nozzle Numbers; AN017, AN018, AN019 and AN022.

Series J+ Venturi / Diffuser Tube is shown in our line drawing as a component part of the shallow well package for the Goulds Pumps Series J. Please note the part offered here is the Venturi / Diffuser Tube only.

J+ Series, Shallow Well Adapter Gasket. Gasket is shown in image Below the Nozzle.

Pump casting for model J5,J5H, J7, J10, J15

Pump casting fits model J5S, J5SH, J7S, J10S, J15S

Seal Ring - OEM Repair Part. Seals pump casting to diaphragm of Goulds Jet Pumps. For use with Goulds Jet Pump Models: J5, J5H, J7, J15, J5S, J5SH, J7S, J10S & J15S.

Pump Diaphragm - OEM Repair Part for Goulds Series J+ and JS+ fits models J5, J5H, J7, J10, J15, J5S, J5SH, J7S, J10S & J15S.

Tubing for Series J+ and JS+ Models

Diffuser / Guide-vane for Goulds Pumps - Series J+ and JS+ pumps, repair part.

Impellers for Goulds J+ and JS+ series pumps. Impellers that are matched to Goulds Pumps models that have motor sizes of 1/2, 3/4, 1, and 1-1/2HP.

Mechanical seal for J+ and JS+ Series motors.

Motor adapter for 1/2-1 1/2hp Series J+ and JS+ pumps

Motor deflector

Tubing and fitting kit for Goulds Models J5, J5H, J5s, J5SH ½hp pumps. Model J7, J7S, 3/4 hp pumps. Model J10, J10S 1hp pumps. Model J15,J15S, 1 1/2 hp pumps consists of tubing, elbow and straight adapter.

Diffuser for Goulds Series JS+ models J5S, J7S and J10S pumps. The difuser is a component part of the Goulds Pump shallow well jet pumps Series JS+.

Square D brand of Pumptrol Narrow differential pressure switches by Schneider Electric. Standard Action Fully Adjustable controls electrically driven water pumps. Select Pressure Ranges: Model J20: 20-40 PSI or Model J21 30-50 PSI.

This replacement motor brush kit from Liberty Pumps is a replacement kit for the model 331 Transfer Pump's motor. The motor brush's should be replace about every 300 hours of work. The model number for the Liberty Pumps Motor Brush Parts Kit is K0011021.

Includes impeller, shaft seal and gaskets.

Gasket set fits with LTS general purpose reservoir pump from Hartell.